How To Strip Thompson's Water Seal. Allow 20 or more minutes for the solution to penetrate the sealant. Bring the seal onto the tray area.
To use mineral spirits, wipe the spirits over the area with a cloth. Deck sealing and staining tips. I would not paint the concrete roof, because i like the warmth of the red color.
There Is No Need To Remove The Thompson's To Stain Or Paint The Deck Or Railings.
First, i would get rid of those cedars, followed by that scraggly tree that hides the house. Start at one corner and work from one end to another. If you’re not using a pump up garden sprayer, use your piece of cloth or brush directly in the sealant can, and then apply it to the deck surface.
It Is Simply Paraffin Wax Dissolved In Mineral Spirits.
Click to see full answer. Cleaner if the thompson's was applied 2 years ago or more, stain stripper if less then 2 years. Let it sit for a few minutes, then scrub the area with a scrub brush.
Applying A Sealer And/Or Stain Typically Is Recommended Every One To Three Years, Depending.
Deck strippers are applied to neutralize clear sealers as well as semi. Make sure that you do this transfer over the top of a drop cloth to collect any spills. Some good choices for this are krud kutter or simple green.
The Waterproofing Nature Of Thompson's Precludes Using A Water Based Product As A Stain Or Paint.
The equipment and supplies you’ll need. Thompson's waterseal products typically need only one application, but you can apply a second coat of stain to darken the wood, if desired. You can remove it by mixing ammonia and water at a 1 to 1 dilution ration.
Spray Thompson Water Seal All Over Your Deck.
Let it dry for up to 24 hours. You can also remove it with mineral spirits and scrubbing. Thompson water seal dry time takes about 24 hours to dry thoroughly.
Tidak ada komentar:
Posting Komentar